New possibilities with digital fibre sensors
SUNX has developed a new top price fibre sensor. The quick set mode allows inexperienced operators to use the sensor quickly. For experienced operators, the setting and PRO mode are still available.
Other features, such as the ECO mode, copy and GETA function, enhance its practicality in the workplace. A total product range of 12 types will be available for all customers' requirements.
Characteristics:
- One 4-digit green, one 4-digit red LCD display
- Copy settings via wiring as with DP-100
- 3-step setting hierarchy, from basic to advanced
- External input for external adjustment
- No need to connect amplifiers in case interference prevention is requested
- Direct installation possible without bracket or DIN rail
- Commercially available connector simplifies procurement
- Key-lock function
- Teaching, light-ON / dark-ON setting
- Threshold values can automatically adjust to changes in incident light
- Intensity of emitted light can be reduced automatically to ensure stable sensing
Accessories:
- Various cable lengths: 1, 2, 3, 5m
- End plates
- Protection cover
| |
Standard type |
Long sensing range type |
| |
|
Cable set |
|
Cable set |
| NPN-output |
FX-101(-Z) |
FX-101-CC2 |
FX-102(-Z) |
FX-102-CC2 |
| PNP-output |
FX-101P(-Z) |
FX-101P-CC2 |
FX-102P(-Z) |
FX-102P-CC2 |
| Type of amplifier |
Digital |
| Timer function |
Timer period: 1ms, 5ms, 10ms, 20ms, 40ms, 50ms, 100ms, 500ms, 1000ms |
| Interference prevention function |
Incorporated
Selectable emission frequency method (Note)
(Functions at emission frequency 1, 2 or 3) |
Incorporated
Selectable emission frequency method (Note)
(Functions at emission frequency 1, 2, 3 or 4) |
| Sensing range |
Depends on fibre type used |
| Response time |
250/ 450/ 500/ 600µs |
2.5/ 2.8/ 3.2/ 5.0ms |
| Output transistor |
Max. 100mA |
| Emitting diode |
Red LED (Peak emission wavelength : 632nm) |
| Housing material |
Plastic |
| Rated current consumption |
Normal operation: 30mA or less at 24V supply voltage
ECO mode: 25mA or less at 24V supply voltage |
| Protection |
IP40 |
| Physical size (HxWxL) |
31 x 9 x 64.5mm |
| Connection method |
Connector attached cable, M8 connector cable |
| Operating voltage |
12 - 24V DC (±10%) |
| Usable ambient temp |
-10°C to +55°C |
| Weight (approx.) |
Net weight: 15g
Gross weight: 35g |
Net weight: 15g
Gross weight: 75g |
Net weight: 15g
Gross weight: 35g |
Net weight: 15g
Gross weight: 75g |
Note: When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values. However, the interference prevention function does not operate at emission frequency 0 (factory default setting) for the FX-101(P)(-Z) / FX-101(P)-CC2.
|
Ionizers
Products
