 |
|
|
FX-311 - advanced manual setting fibre sensor based on FX-301
|
|
The original SUNX optical technology developed for the FX-301 digital fibre sensor, including its benefits of simple maintenance, reduced wiring and easy installation, is taken a step further with FX-311. FX-311 incorporates technology to handle every major concern and deliver superior performance for a variety of on-site requirements.
Characteristics:
- Long-range sensing made possible with built-in optical lens
- Response times 0.25/2ms selectable
- OFF-delay timer
- 12-turn potentiometer with visible indicator
- Close mounting is possible for up to four fibre heads
- Supply voltage via only one cable for up to 16 amplifiers
- Reduced intensity mode for transparent objects
- Wide range of fibre optical cables are available
- Optional: Up to 16 I/O devices can be connected at once using MIL connectors (SC)
Options:
- PLC connection system SC
- Main and sub cables (1 / 2 / 5m)
|
|
|
| NPN output | FX-311 | FX-311B/G | | PNP output | FX-311P | FX-311BP/GP | | Type of amplifier | Manual setting | | Timer function | OFF-delay timer (10ms or 40ms switchable) | | Automatic interference prevention function | Incorporated for up to 4 amplifiers | | Sensing range | Depends on fibre type used | | Response time | 0.25 / 2ms | | Output transistor | Max. 100mA | | Emitting diode | Red LED (modulated) | Blue LED, 470nm
Green LED, 525nm | | Rated current consumption without loud | Max. 35mA | | Housing material | Plastic | | Protection | IP40 | | Physical size (HxWxL) | 30.5 x 10 x 64.5mm | | Connection method | Connector | | Operating voltage | 12 - 24V DC (± 10%) | | Usable ambient temp. | -10°C to +55°C | | Weight (approx.) | 15g |
|
|
|
|
|
FX-311 typical applications
|
Presence of glass substrate
|
Position control
|
Edge detection
|
|
|
Ionizers
Products
