Our website uses cookies and similar tools to improve its performance and enhance your user experience.

OK

To find out more about the cookies we use or how to change your settings, please see our Cookie Policy. You can revoke your permission at any time here.

EC-G02 ionizer

  • EC-G02 ionizer

Pulse Air-Gun Ionizer

With the new pulse air-gun ionizer from Panasonic, operators can comfortably neutralize static electricity while manually cleaning. The pulse air-gun’s light-weight, ergonomic design combined with an oil- and heat-resistant 2m cable makes it ideal for flexible use at the production line.
A white LED on the front of the gun illuminates target objects.
You can switch between long pulse, short pulse and continuous air emission modes. Ionized air can be emitted at high pressure (range 0.05 to 0.50 MPa), neutralizing static charges and removing dust simultaneously and swiftly.

Characteristics:

  • Charge removal time of 0.5s
  • Light-weight, ergonomic design for operator comfort
  • High emission pressure (range 0.05 to 0.50 MPa), maximizing cleaning speed
  • Oil and heat-resistant 2m cable
  • Three ionized air emission modes: long pulse, short pulse, continuous
  • White LED for illuminating target object

Specifications

Specifications
Type Gun type
Model no. EC-G02
Charge removal time Max. 0.5s (±1000V -> ±100V )1
Applicable fluid Air (dried clean air)2
Supplied air flow Max. 300ℓ/min, active noise reduction
Air pressure range 0.05 to 0.50MPa
Power supply voltage AC adapter:
Input: 100 to 240V AC ±10%, 50/60Hz
Output: 24V DC
Power consumption Max. 30VA
Discharge method High-frequency AC method
Pulse air mode Long pulse, short pulse , continuous; selectable by switch
LED illumination mode ON (always ON) / SYNC (synchronized with trigger) / OFF (always OFF)
Ambient temperature 0 to +50°C (no dew condensation), AC adapter: 0 to +40°C
Ambient humidity 35 to 65% RH (No dew condensation)
Weight Approx. 270g (main unit only)

Where measurement conditions have not been specified precisely, the specifications apply to an ambient temperature of 20°C.

Notes:
1 Typical value for pulse air mode: CONT at 100 mm from the front of discharge nozzle at an applied air pressure of 0.50MPa.
2 Dried clean air is the air passing through an air dryer (dew point approx. -20°C) and air filter (mesh size approx. 0.01μm)

Typical applications

Product Feature

Charge removing and cleaning on PCB

Product Feature

Charge removing and cleaning on FPD

Product Feature

Dust removal before painting

Product downloads