The new, wide-area ionizer from Panasonic provides you with a new opportunity to effectively remove static from your production line. ER-TF Ionizers are safe in design, easy to maintain and come in a variety of sizes to meet your workstation requirements. Moreover, there is no need for compressed air, which makes installation easy and keeps costs under control.
If a foreign object enters the air intake area, an automatic detection mechanism interrupts the high-voltage circuit. The direction in which and how fast the air blows can be easily adjusted at any time. A series of LEDs indicate operation conditions at a glance. Discharge needle units can be removed and attached quickly, and the air filter takes only an instant to replace.
If you are considering introducing an industrial ionizer into your production line, the ER-TF Ionizer may be just what you’re looking for!
Flexible setup: overhead, desktop, in front
Air flow can be set to 4 different speeds
Three models available
F.G. connection cable
Spare replacement filters (5pcs.)
Blindfold seals (2 sheets)
Air filter (10 pcs. per set)
Discharge needle unit
Silent fan cover
Wide-area fan type
Charge removal time
Approx. 1s (Note 1)
±10V or less (Note 2)
Accessory AC adapter input: 100 to 240V AC ± 10 % 50/60Hz (Output: 24V DC)
80VA or less (at 100V: 70VA or less)
0 to + 50°C (No dew condensation), AC adapter: 0 to +40°C
35 to 65% RH (No dew condensation)
Bar unit enclosure: ABS, Fan unit enclosure: ABS, Discharge needles: tungsten, Mounting bracket: SPCC
Notes: 1) Typical value at a distance of 200mm from the front surface of the air outlet at the unit center at maximum fan speed. 2) Typical value at a distance of 300mm from the front surface of the air outlet at the unit center at maximum fan speed. 3) Please prepare the required AC cable separately.