Nasza strona wykorzystuje pliki cookies (ciasteczka) oraz podobne narzędzia w celu poprawienia wydajności i zwiększenia wygody użytkowania.


Jeżeli chcesz dowiedzieć się więcej na temat plików cookies, które wykorzystujemy oraz tego jak zmienić swoje ustawienia prywatności przeglądarki, prosimy o zapoznanie się z Polityka Przetwarzania Plików Cookies (ciasteczek). Możesz wycofać swoją zgodę w każdej chwili.

Czujnik fotoelektryczny FX-500

  • Czujnik fotoelektryczny FX-500
  • RB:Play Video

The industry’s leading fiber amplifier in sensing performance

Thanks to its new "application-specific integrated circuit" (ASIC), Panasonic can solve applications with fiber optic sensors that were previously impossible. Not only can the FX-500 reach a response time of 25µs while providing extremely accurate detection, integrated logic functions save you money because external controllers are no longer needed for normal applications and threshold tracking and self-diagnostic functions save time for maintenance. Moreover, the reliability of the detection has increased by 75% compared to that of previous models.

The customer can choose between digital output types with one or two outputs, or an analog output type.


  • One 4-digit green, one 4-digit red LCD display
  • Copy settings via optical interface
  • Decreased variations among amplifiers
  • Input for external settings, i.e. threshold value (not available for FX-501)
  • Up to 8 settings can be saved and loaded (data bank)
  • Logical calculation functions
  • Light intensity and gain setting for transparent object detection
  • Threshold tracking
  • Self-diagnosis output
  • Display easy readable at angles of up to 60°
  • Superior quality fibers (listed in the FX-500 brochure)


  • Quick connection cables in lengths of 1, 2 or 5m
  • End plates
  • Protection cover


  Standard type with 1 digital output Type with
2 digital outputs
Type with
analog output
NPN output FX-501 FX-502 FX-505-C2
PNP output FX-501P FX-502P FX-505P-C2
Type of amplifier Digital
Timer Timer period: 0.1ms to 999.9ms
Interference prevention Incorporated
Sensing range Depends on fiber type used
Response time 25µs, 60µs, 250µs, 2ms, 4ms, 24ms 2ms
Output transistor Max. 100mA Max. 50mA Max. 50mA
Analog output   4 to 20mA
Emitting diode Red LED (Peak emission wavelength : 650nm)
Housing material Plastic
Rated current consumption Normal operation: 40mA or less at 24V supply voltage
ECO mode: 28mA or less at 24V supply voltage
Protection IP40
Physical size (HxWxL) 32 x 10 x 75mm
Connection method


Cable 2m

Operating voltage 12 - 24V DC (±10%)
Usable ambient temp -10°C to +55°C
Weight (approx.) Net weight: 15g Net weight: 60g
Gross weight: 70g Gross weight: 100g

Typical applications

Product Feature

Edge tracking of film or sheets
Sensor: FT-WA30 + FX-505(P)

Product Feature

Detection of transparent labels on transparent sheets
Sensor: FT-W4 + FX-501(P)

Product Feature

Logic functions for synchronisation and detetection
Sensor: 2xFD-P2 + 2xFX-502(P)

Product downloads