PLC hero Panasonic Industry

PLC FP0R: new standard for compact PLCs

The FP0R is the new standard for compact PLCs offering enhanced functionality and an optimized performance.

Ultracompact with enhanced functionality

Due to its extremely compact design, the FP0R is particularly suited for small switching cabinets and other locations with limited space. Up to four axes can be positioned without an expansion unit, and the USB TOOL port ensures simple and fast transfer of programs. The FP0R convinces in demanding environments such as labeling applications.

FP0R - with enhanced, advanced functionality and performance

Our customers stand to benefit from the advanced features of the FP0R control units.

FP0R - same ultra compact size as FP0
The FP0R control unit has the same dimensions as the FP0: W25 x H90 x D60mm. You can connect up to 3 FP0 expansion units to the FP0R, yielding up to 128 I/O points at a total width of just 100mm!

FP0R- fully compatible with FP0 units
FP0R control units are the same size and color, and have the same pin assignment and wiring as the FP0 control units. The FP0R can use existing FP0 programs without needing to change them, making replacement as simple as “plug and play”. Of course, the FP0R can use all FP0 expansion units.

  • Ultra high-speed processing enhances productivity
    An ultra high speed of 0.08µs/step for basic instructions for the first 3000 steps and 0.58µs/step thereafter. The FP0R is ideal for positioning and process automation applications, e.g. in labeling machines.
  • Large programming capacity of 16k or 32k steps
  • Generous data register of up to 12k or 32k words
  • Independent comment memory
  • USB2.0 port provides high-speed program transfer
  • The new F-type FP0R provides maintenance-free and complete backup of all data without requiring a battery. Industry's first!
  • Highly advanced, built-in positioning functions
    • Jog operation
    • Individual settings for acceleration and deceleration for ramp functions
    • Target speed can be changed by an external signal input during jog operation or trapezoidal control
    • Can read encoder signals of up to 50kHz (pulse frequency measurement)
    • 6-channel high-speed counters and 4-axis pulse outputs can be used simultaneously
  • FP0R units provide various kinds of networking communication using a built-in interface or expansion units
    • Ethernet (Modbus TCP/IEC60870)
    • Profibus
    • CC-Link
    • MEWNET-W0
    • C-NET
    • RS232C or RS485 serial communication

Specifications FP0R

PLC type C10 series (relay output) C14 series (relay output) C16 series (transistor output) C32 series (transistor output) T32 series (transistor output) F32 series (transistor output)
Number of inputs 6 8 8 16 16 16
Number of outputs 4 relay 6 relay 8 NPN/PNP 16 NPN/PNP 16 NPN/PNP 16 NPN/PNP
Output capacity 2A 2A 0.2A 0.2A 0.2A 0.2A
Digital I/Os (max.) 106 110 112 128 128 128
Processing speed Up to 3000 steps: 0.08µs/step (basic instruction). After 3000 steps: 0.58µs/step (basic instruction)
Program memory EEPROM (no back-up battery required)
Program capacity 16000 steps 32000 steps
Data register (DT) 12315 words 32765 words
Memory backup (Flash ROM) Backup with F12, P13 instruction for all areas

Auto backup when power is off: Counter: 16 points; Internal relay: 128 points; Data register: 315 words

--
Memory backup (RAM)   Backup of the entire area by a built-in battery Backup of the entire area by FRAM without needing a battery
 

Special features

High-speed counter Single-phase: 6 channels (50kHz); 2-phase: 3 channels (15kHz)
Pulse output -- 4 channels (50kHz), two channels can be interpolated
PWM output -- 4 channels (6Hz to 4.8kHz)
RS232C port Up to two serial interfaces
RS485 port The following types support RS485 communication with the COM port: C10MRS, C14MRS, C16MT, C16MP, C32MT, C32MP, T32MT, T32MP, F32MT, F32MP. 3-pin terminal block. Baud rate: 19200, 115200 bits/s. Transmission distance: 1200m. Communication method: half-duplex.
Clock/calendar function -- available --
Other functions Editing in RUN mode, download in RUN mode (including comments); 8-character password setting, and program upload protection
Operating voltage 24V DC (± 10%)

Control units with relay output

PLC Comapct FP0R control units with relay output Panasonic Industry
  • AFP0RC10RS, input 6, relay output 4
  • AFP0RC10CRS, input 6, relay output 4, with RS232C
  • AFP0RC10MRS, input 6, relay output 4 , with RS485
  • AFP0RC14RS, input 8, relay output 6
  • AFP0RC14CRS, input 8, relay output 6, with RS232C
  • AFP0RC14MRS, input 8, output 6, with RS485

Control units with transistor output

PLC Compact FP0R control units with transistor output Panasonic Industry
  • AFP0RC16T, input 8, NPN output 8
  • AFP0RC16CT, input 8, NPN output 8, with RS232C
  • AFP0RC16MT, input 8, NPN output 8, with RS485
  • AFP0RC16P, input 8, PNP output 8
  • AFP0RC16CP, input 8, PNP output 8, with RS232C
  • AFP0RC16MP, input 8, PNPoutput 8, with RS485
  • AFP0RC32T, input 16, NPN output 16
  • AFP0RC32CT, input 16, NPN output 16, with RS232C
  • AFP0RC32MT, input 16, NPN output 16, with RS485
  • AFP0RC32P, input 16, PNP output 16
  • AFP0RC32CP, input 16, PNP output 16, with RS232C
  • AFP0RC32MP, input 16, PNPoutput 16, with RS485

Control units T type

PLC Compact FP0R control units T type Panasonic Industry
  • AFP0RT32CT,  input 16, NPN output 16, with RS232C, built-in battery
  • AFP0RT32MT, input 16, NPN output 16, with RS485, built-in battery
  • AFP0RT32CP,  input 16, PNP output 16, with RS232C, built-in  battery
  • AFP0RT32MP, input 16, PNP output 16, with RS485, built-in battery

Control units F type

PLC Compact FP0R control units F type Panasonic Industry
  • AFP0RF32CT,  input 16, NPN output 16, with RS232C, battery-less data backup
  • AFP0RF32MT, input 16, NPN output 16, with RS485, battery-less data backup
  • AFP0RF32CP,  input 16, PNP output 16, with RS232C, battery-less data backup
  • AFP0RF32MP, input 16, PNP output 16, with RS485, battery-less data backup

Input only type

PLC Compact FP0R input only type Panasonic Industry
  • FP0-E8X, input 8 points
  • FP0-E16X, input 16 points

Relay output type

PLC Compact FP0R relay output type Panasonic Industry
  • FP0-E8RS, input 4 points, output 4 points
  • FP0-E8YRS, output 8 points
  • FP0-E16RS, input 8 points, output 8 points
  • FP0-E32RS, input 16 points, output 16 points

Transistor output type

PLC Compact FP0R transistor output type Panasonic Industry
  • FP0-E8YP, output 8 points PNP
  • FP0-E8YT, output 8 points NPN
  • FP0-E16YP, output 16 points PNP
  • FP0-E16YT, output 16 points NPN

Input and transistor output type

PLC Compact FP0R transistor output type Panasonic Industry
  • FP0-E16P, input 8 points, output 8 points PNP
  • FP0-E16T, input 8 points, output 8 points NPN
  • FP0-E32P, input 16 points, output 16 points PNP
  • FP0-E32T, input 16 points, output 16 points NPN

Analog units

Product AFP0RAD4 AFP0RAD8 AFP0RA21 AFP0RA42 AFP0RDA4
Input data
Channels 4 8 2 4  
Voltage mode -10 to +10 V 14 bits, -5 to +5 V 14 bits, 0 to +10 V 14 bits, 0 to +5 V 14 bits, -100 to +100mV 12 bits (-2000 to +2000)  
Current mode 0 to 20 mA 14 bits  
Thermocouple mode          
Resolution 14-bit  
Conversion speed for voltage / current for thermocouple 2 ms/all channels
--
 
Output data
No. of outputs     1 2 4
Voltage mode     -10 to +10 V 14 bits, -5 to +5 V 14 bits, 0 to +10 V 14 bits, 0 to +5 V 14 bits
Current mode     0 to 20mA 14 bits, 4 to 20mA 14 bits
Resolution     14-bit
Conversion speed     500µs / ch.

Multiple floating point calculation, accurate PID and auto-tuning can be performed with great efficiency.

RTD input unit

PLC Compact FP0R RTD input unit Panasonic Industry

The new module determines temperatures with extreme precision and is easy to use. The temperature data obtained using the RTD (Resistance Temperature Detector) is converted to the digital value to be read by the CPU.

  • The module can be easily installed in an existing system.
  • Multiple RTD types are allowed in one module, yielding a cost-effective solution.
  • The temperature data measured can be converted to either degrees Celsius or degrees Fahrenheit inside the FP0 RTD unit.
  • A broken RTD can be detected.

Available RTD types: Pt100 (to IEC751), Pt1000 (to IEC751), Ni1000 (to DIN43760)

FP0-RTD6

Product FP0-RTD6
Input channels 6
Input range

Pt100: -200°C to +500°C

Pt1000: -200°C to +300°C

Ni1000: -30°C to +150°C

Resistor: 20Ω to 2200Ω

Resolution 0.1K/°F, 0.01K/°F (selectable by PLC program)
Sampling cycle 0.1 or 1s for all channels (selectable via DIP switches)
Accuracy  
Pt100 Cycle 1s Ambient temp.: 25°C

0.3K (-10°C to +30°C)

0.2%/1.4K (-200°C to +500°C)

Entire temp. range 0.35%/2.5K
Cycle 0.1s Entire temp. range 0.5%/3.5K
Pt1000 Cycle 1s Ambient temp.: 25°C

0.3K (-10°C to +30°C)

0.2%/1.0K (-200°C to +300°C)

Entire temp. range 0.35%/1.7K
Cycle 0.1s Entire temp. range 0.5%/2.5K
Ni1000 Cycle 1s Entire temp. range 1K
Cycle 0.1s Entire temp. range 2K
Resistor Cycle 1s Entire temp. range 1W (20 to 2200Ω)
Cycle 0.1s Entire temp. range 2W (20 to 2200Ω)

Thermocouple input units

Product FP0-TC4 FP0-TC8
Channels 4 8
Input range

K, S type thermocouple: -100°C to 500°C

T type thermocouple: -100°C to 400°C

R type thermocouple: 0°C to 1500°C

Resolution 0.1°C
Sampling cycle

300ms: when using 2 channels for an input point

500ms: when using 4 channels for an input point

700ms: when using 6 channels for an input point

900ms: when using 8 channels for an input point

Accuracy

Range for K and J (-100°C to 500°C): 0.8°C

Range for T (-100°C to 400°C): 0.8°C

Range for R (0°C to 99.9°C): 3°C

(100°C to 299.9°C): 2.5°C

(300°C to 1500°C): 2°C

Input impedance More than 1MΩ
Insulation method
  • Between thermocouple input terminals and control unit internal circuits: photo-coupler insulation/DC-DC insulation
  • Between thermocouple input terminal channels: PhotoMOS relay insulation
  • Up to three units can be added to each control unit enabling temperature control of up to 24 channels.
  • Broken thermocouples can be detected.

PROFIBUS unit

PLC Compact FP0R PROFIBUS EN Panasonic Industry

The FP0 DPS2 can operate either as a DP slave module or as a remote I/O system to which different decentralized inputs and outputs can be connected. A DIP switch can be used to switch between the two modes:

  • Mode 1: DP Slave module. Connect the FP0 or FPS CPU + expansion modules to the PROFIBUS network.
  • Mode 2: remote I/O. Connect up to three expansion modules without CPU to the PROFIBUS network.

In remote I/O mode, the unit can be connected to any PLC from any manufacturer that offers a PROFIBUS communication interface.

The FP-PS24 high-end power supply units - also for arduous application conditions

The FP-PS24 high-end power supply units Panasonic
  • Up to 91.5% efficiency (FP-PS24-060E)
  • Current limiting and short-circuit protection
  • High power density with minimal loss
  • Wide ambient temperature range from -10°C to +70°C, without performance loss
  • Safety Standards Approved (IEC60950, UL60950,CSA22.2-60950, EN60950) tested by CSA
  • Protection class II, without grounding
  • Easy mounting and wiring
  • Extremely compact with optimal air cooling

Downloads

Name File Type Size Date Language
ZIP Analogmodule für FP0 und FP-Sigma, ACGM0158 Manual 1.5 MB 01.04.2005 German
PDF Automate programmable FP0R et servomoteur AC MINAS A6 Flyer 513.2 KB 16.05.2017 French
PDF Brochure Automates programmables industriels, 4104eufr Catalog, Shortform 5.9 MB 09.04.2021 French
PDF Cablaggio collegamenti porta COM per GT02 Data sheet 36.6 KB 12.10.2017 Italian
PDF Catálogo Resumen Autómatas Programables, 4104eues Catalog, Shortform 13.3 MB 21.01.2022 Spanish
PDF Communication cable between GT terminals and FP Series Tool port, 2m Data sheet, Cable drawing 36.6 KB 01.05.2007 English
PDF Connection cable MINAS LIQI to FP-Sigma/FP0R PNP, 1 axis, 26-pin <-> 2x10-pin MIL connector (for I/O), 2m, DV0P0800T01 Data sheet, Cable drawing 97 KB 03.07.2013 English
PDF Connection cable Minas A4/A5/A6 servo driver to FP-Sigma/FP0R, NPN, 1 axis, DVOP0989W1 Data sheet, Cable drawing 331.9 KB 25.03.2024 English
PDF Connection cable Minas A4/A5/A6 servo driver to FP-Sigma/FP0R, PNP, 1 axis, DVOP0988W1 Data sheet, Cable drawing 163.1 KB 05.05.2011 English
PDF Connection technology for Programmable Logic Controllers Catalog, Shortform 637.1 KB English
ZIP Control FPWIN Pro7, free basic version 7.7.1.1 Supports all PLCs including the FP7, PLC program length limitation is 10000 steps. This version can update an older basic version. For Windows 10/11. Software 462.2 MB 18.01.2024 English, german, italian, french, spanish, japanese, chinese, korean
PDF Corvina Cloud. Komplett vernetzter Kommunikationsservice für die Industrie Data sheet 229.9 KB 29.11.2018 German
PDF Data sheet AFPC10PINS, screw terminal for 8 PLC outputs Data sheet 376.4 KB 04.06.2018 English
PDF Data sheet AFPRT8, Relay terminal with 8 relays (2A), with LED, changeover contact Data sheet 265.4 KB 04.06.2018 English
PDF Data sheet FP0R Data sheet 2.3 MB English
PDF Data sheet MF20MD, Connector screw terminal 20 pins Data sheet 329.8 KB 04.06.2018 English
PDF Datenblatt AFPC10PINS, 8-fach Klemmen-Terminal Data sheet 492.5 KB 04.06.2018 German
PDF Datenblatt AFPRT8, 8-fach Relais-Terminal mit Wechselkontakten Data sheet 264.8 KB 04.06.2018 German
PDF Datenblatt FP0R Data sheet 1.1 MB German
PDF Datenblatt MF20MD, Klemmenterminal mit 20 Schraubklemmen Data sheet 334.3 KB 04.06.2018 German
ZIP FP Data7 V.1.11.0. This Windows software communicates with all PLCs. It’s for a data load, save, edit of the PLC internal memory. Export and import in CSV format is possible too. For Windows 7/8.x/10. Software 58.2 MB 19.12.2022 English
PDF FP I/O Terminal Board Installation Instructions, MJEC-FPIOTB Manual 1.1 MB 11.07.2022 English
PDF FP I/O Terminal Unit Installation Instructions, MJEC-FPIOTU Manual 1.1 MB 11.07.2022 English
PDF FP Modem-56k RS232C Cable for FP Series PLC COM Port with 9-pin Sub-D connector, 0.5m, CABMODPLC211 Data sheet, Cable drawing 56.4 KB 27.06.2005 English
PDF FP Modem-56k RS232C cable for FP Series PLC COM port with screw terminal, 0.5m, CABMOD111D Data sheet, Cable drawing 63.2 KB 22.03.2007 English
ZIP FP Series Programming Manual, ARCT1F313E-18 Manual 9.1 MB 01.08.2011 English
PDF FP0 / FP-Sigma CC Slave Link Unit Technical Manual, ARCT1F380E4 Manual 715.8 KB 01.07.2013 English
ZIP FP0 A/D Converter Unit Technical Manual Manual 413.4 KB 01.12.2006 English
PDF FP0 D/A Converter Unit Technical Manual, ARCT1F382E4 Manual 1 MB 01.07.2013 English
PDF FP0 RTD Unit Technical Manual, ACGM0159V20EN Manual 617.2 KB 06.03.2024 English
PDF FP0 Thermocouple Unit Technical Manual, ARCT1G366E4 Manual 1.5 MB 01.07.2013 English
PDF FP0-A21 Analog I/O Unit Technical Manual, ARCT1F390E3 Manual 512.5 KB 01.07.2013 English
ZIP FP0-DP Slave Modul Hardware Manual 615.6 KB 01.10.2009 German
ZIP FP0-DP Slave Unit Hardware Manual 574.6 KB 01.10.2009 English
PDF FP0R - MINAS A6: Comunicación Modbus RTU RS485, Ahorro de Espacio y de Cableado, Para Solución Motion Control Flyer 425.7 KB 03.04.2016 Spanish
PDF FP0R Analog I/O Unit User’s Manual, WUME-FP0RAIO-031 Manual 2 MB 14.02.2023 English
PDF FP0R Benutzerhandbuch, ARCT1F475-E3 Manual 30.6 MB 13.07.2015 English
PDF FP0R Controllori Programmabili Data sheet 1.9 MB Italian
PDF FP0R Manual de Usario, ACGM0475V3.1ES Manual 5.8 MB 01.02.2015 Spanish
PDF FP0R Manuale Utente, ACGM0475V3IT Manual 5.5 MB 01.11.2014 Italian
PDF FP0R Manuel de l'utilisateur, ACGM0475V3FR Manual 5.3 MB 01.11.2014 French
ZIP FP0R User's Manual (European version for Control FPWIN Pro) Manual 11.1 MB 01.01.2012 English
PDF FP0R User's Manual, ACGM0475V3EN Manual 5 MB 01.11.2014 English
ZIP FP0R series, CAD data, step format CAD 6.2 MB 28.06.2022 English
ZIP FPWIN Pro projects in LD and ST code for positioning operations with a single-speed and a double-speed inverter. (Examples related to FP-X, FP Sigma, and FP0R User's Manuals.) Software, Programming examples 306.5 KB 01.10.2011 English
PDF Kommunikationskabel zwischen C-Net-Adapter und FP0 COM Port, AFB85D017 Data sheet, Cable drawing 231.7 KB 23.04.1999 German
PDF Kommunikationskabel zwischen PC (RS232C) und FP0/FPX/FPG (Sigma) COM Port, AFB85D018 Data sheet, Cable drawing 237.6 KB 23.04.1999 German
PDF Kommunikationskabel zwischen Siemens M20-Terminal / TC35-Terminal, FP-Modem EU, Fremdmodem und FP0 COM Port, AFB85D006 Data sheet, Cable drawing 235 KB 07.10.2002 German
PDF Les essentiels - Produits d’automatisme, 6215eufr Catalog, Shortform 5.5 MB 16.06.2023 French
PDF Lösungen - Anschlusstechnik für SPS Data sheet 727.8 KB 07.08.2018 German
PDF MEWTOCOL Communication User’s Manual, WUME-MEWCP-02 Manual 4.7 MB 14.12.2022 English
PDF MINAS A5/A6 servo driver to FP series PLC incl. FP0H (PNP output type), 1 axis, 50 pin connector, loose wires for I/Os, DV0P0988WP-x Data sheet, Cable drawing 450.3 KB 29.11.2018 English
ZIP Motion & Communication FPWIN Pro 7 Library for MINAS A6 Series, Modbus RTU, Version 2.1.0.2, Included Demo Program. Supported PLCs: FP0R, FP-Sigma, FP-X, FP7, FP0H Software, Library 4.7 MB 12.02.2020 English
ZIP Motion Control Library for MINAS LIQI / A5 / A6 Series, Pulse Output Control with compact PLCs, Version 1.0, Included Demo Program. Supported PLCs: FP0R, FP-Sigma, FPX, FP7 Software, Library 1.3 MB 12.12.2017 English
PDF Overview Programmable Logic Controllers, 4104euen Catalog, Shortform 6 MB 18.10.2021 English
PDF Panasonic & EPLAN: A strong cooperation for global engineering Flyer 813.6 KB English
PDF Panasonic & EPLAN: Una estrecha colaboración para una ingeniería global Flyer 815.4 KB Spanish
Progetti demo per PLC, Servo, HMI Software 2.2 MB 12.10.2017 Italian
PDF Programming cable for FP and GT series (MINI-DIN to 9 PIN SUB-D), 3m, AFC8513 Data sheet, Cable drawing 35.7 KB 19.03.2007 English
PDF Schnell und leistungsstark: FP0R Flyer 1.1 MB German
PDF Serie TB20 - Sistema de E/S distribuidas basadas en bus de campo Data sheet 550.6 KB Spanish
ZIP Software tool used for switching FP0R PLC types from FP0R mode into FP0 mode. After that FP0R PLC can be programmed with software tools supporting FP0. Software 35.2 MB 17.07.2013 English
PDF Telecontrol: catalogo resumido Catalog, Shortform 1.1 MB Spanish
PDF Top seller - Automation products, 6215euen Catalog, Shortform 15.7 MB 04.05.2023 English
PDF Un abbinamento vincente: FP0R Touch control - Starter Kit Flyer 1.4 MB 10.02.2016 Italian
PDF Übersicht Speicherprogrammierbare Steuerungen, 4104eude Catalog, Shortform 13.3 MB 02.12.2021 German
PDF Übersicht Topseller Automatisierungstechnik, 6215eude Catalog, Shortform 15.6 MB 24.04.2023 German
ZIP Control FPWIN Pro7, full and update version 7.7.1.1 FULL: For a full version buy a license separately. Article no. is " FPWINPRO7_LICENSE ". Please order it at your local Panasonic sales contact. Thi… Software 462.2 MB 18.01.2024 English, german, italian, french, spanish, japanese, chinese, korean
ZIP FPGT Loader, Vers.2.3.0.1, is a utility for up-/downloading data to and from GT panels(GT01, GT02, GT03-E, GT11, GT21, GT05, GT12, GT32, GT703, GT704, GT707, GT710) and PLCs(FP0, FP0R, FP-e, FP-SIGMA… Software 92.9 MB 27.12.2023 English, German, Spanish